The technology of laser engraving machine engraving wood materials
Performance of the gray
Ordinary mechanical sculpture carving of varying thickness point, not the economical way and thus does not have the gray form of expression.Laser engraving machine is based on the RBI to achieve carving, has a natural advantage in grayscale performance.This sculpture designed to maximize the use of gray-scale manifestation of such benefits, while reducing the coloring process, the cost savings; carved means of expression, increasing the level of graphics.Users in use, the first graphics within different gray-scale filling (the text is first transformed into graphics), engraving output select black and white mode, try the effect of different outlets, the accuracy is generally no more than 500dpi.
Carving materials
Logs (unprocessed timber)
Wood is by far the most commonly used in laser processing of materials, it is easy to carving and cutting.Light-colored wood like birch, cherry or maple, it is easy to laser vaporization, and therefore more suitable for carving.Each wood sign making has its own characteristics, and some dense some, such as hardwood, carving or cutting is necessary to use higher laser power.We recommend that before the carving of wood are not familiar with, we must first study the carving characteristics.
Plywood
In fact, with the engraving on the wood engraving on the plywood is not much difference, but it must be noted, the engraving depth can not be too deep.After cutting the plywood edge also like wood as black as the key to see if the plywood is manufactured using the kind of wood.
Wood carving
In general, wood carving, intaglio engraving depth general requirements deeper.So that the power is generally set higher in case of hard wood may carving graphic color becomes darker. If you want to make light in color, can increase the engraving speed, try carving more than a few times.When some wood carving will produce some soot attached to the wood surface, wood brush to paint with a damp cloth to carefully wipe unpainted may rub not clean, resulting in the finished surface defaced.
Timber cutting
Laser engraving machine, cutting timber depth is not deep, maximum depth of cut depends on wood materials and the laser power to cut very thick wood, can slow down the cutting speed, but may cause the burning of wood. The specific operation may try to use the lenses of large size, and repeat cutting.
Coloration
Generally have a burning sensation in the wood carving, to match with the wood background with a primitive art, the depth of its color laser power, engraving speed.However, some wood is usually soft texture of the kind, no matter how you can not change its color (eg, birch). Coloring of the finished product, you can use acrylic paint.
wood CNC router for sale
