Laser engraving machine work steps is explained in detail
Laser engraving machine work steps is explained in detail
Workpiece before cutting its problems that may arise in the feasibility of laser cutting and cutting process should be considered in advance. Such materials, the possibility of laser cutting? Where is the difficulty of its cutting? Try cutting the samples? How to achieve the requirements of cutting quality and accuracy? Workpiece cut the benchmark starting point on where? This section of our laser engraving machine technical experts to explain the art of laser cutting technology.
Laser cutting machine systems in general by the laser generator (outside) beam transport components table (machine), computer numerical control cabinets, coolers, and computer (hardware and software) components.
1, laser generator.
For the purposes of the laser cutting machine, apart from a few occasions using a YAG laser, the vast majority of electric - optical conversion efficiency is higher and output of high power CO2 gas lasers. Demanding, so it is not all lasers can be used as a cut on the beam quality due to the laser cutting machine work.
2, CNC cutting machine tools.
Consists of three parts, that is the workbench (general precision machine tools), the beam transmission system (sometimes called the optical path, issued by the laser beam to reach the beam within the optical path in the workpiece before the transmission of optical, mechanical components) and computer numerical control systems. By cutting the cabinet and the table of relative movement can be divided into the following three types:
(1) in the cutting process, the beam (by torch injection) and the table are mobile, the general beam along the Y-shift table in the X shift.
(2) in the cutting process, only the beam (cutting torch) mobile workbench does not move.
(3) in the cutting process, only the table moves, the beam (torch) is fixed does not move.
3, laser punching machine.
Over the years, the overseas development of laser cutting machines and laser punching machine for mechanical punching technology, this mechanical mode of the complex shape of the workpiece using mechanical methods out of the hole, the outer edge and then cut out by means of laser cutting and require long-distance cutting lines.
Four, five-axis machine.
Sometimes encounter the need to cut the three-dimensional components of industrial production, the general two-axis, three-axis laser cutting machine can only cut two-dimensional workpiece, this need is equipped with a robotic cutting machine, five-axis machine.
Affect the quality factor of laser cutting machine, laser cutting is an important advantage is the high degree of control can be implemented on the main factors in the process of cutting the workpiece to fully meet customer requirements, and good repeatability. These main factors of the process parameters of the cutting speed, focus position, the auxiliary gas pressure, laser output power.
Laser Marking Machine, Fiber Laser Marking Machine
